Limited Time Offer: StenoGherkins At Cost!

The amazingly generous Paul, new Open Steno community member, recently made an incredible offer: If you buy the parts for a Gherkin keyboard, he'll assemble it for you, no charge! He enjoys assembling keyboards and wants to help people get low-cost, ultraportable machines, even if they don't have any electronics experience. Of course, this offer is always dependent on his own amount of free time and energy. He can't guarantee it'll be valid forever, so I encourage anyone in need of a StenoGherkin to get while the getting's good!



As he said on the Plover Discord:

If I am putting it together for you I will include the standoffs and screws, I have plenty and won't ask you to buy 50 standoffs and 100 screws when you only need a dozen or so but if you're doing this yourself, you want m2 hardware and standoffs at least 10mm long, 10 is the perfect length in my opinion but you will have to trim down the pins the pro micro is soldered to, like this https://bit.ly/2IiVmvr. Not a problem just a caveat.

Keycaps you're on your own for, I can throw in some for a couple bucks just so you have something to use right away but ultimately you will have to source your own and decide what you like (the ones I can include will be DSA profile and could be any color or have any markings on them, whatever I have laying around from grab bags)

G-20 profile caps are very popular for mx style switches and steno, probably the most popular. if you want them, just google 'ortholinear G-20 keycaps' or 'planck G-20 keycaps' these will yield results with only the 1unit caps (almost, the planck sets will usually have a single 2unit cap as well for the space bar on certain planck layouts) which are all you'll need. For this layout, you NEED 25 but you'll probably want 30 so you have a cap for every switch, even if you don't put one on all of them(edited)

Gherkin build materials list:

PCB kit, $20
Pro micro, $8
Diodes, $2.50
Gateron clears, $7.50 for the 30 needed (you can pick any MX style switches you like. MX style is very important to make sure they work with the board. The lightest weight linears possible are what you're looking for. These are only 35 grams of force and would be perfect for most people). I'll update the link if an even better option presents itself.